Pressing Instructions

Formula: DTF FORMULA

** A HEAT GUN WILL TELL YOU IF YOUR PRESS IS ACCURATE **

PRESSURE TEST:  https://www.silhouetteschoolblog.com/2018/02/heat-press-pressure-test-paper-or.html

Every Heat Press is different, temps and pressure are not always accurate or even so adjusting for your individual press is necessary, we highly recommend a heat gun. WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.

DTF TRANSFER FORMULA- COLD PEEL

• 320 degrees; 
• HEAVY PRESSURE 55PSI (S)
• Pre press for 7 seconds to remove wrinkles and moisture;
• Press for 20 seconds; LET COOL THEN PEEL
• Press again for 8 seconds, with a parchment paper covering the design for protection (you don' have to cool again before removing the covering on the repress)

DTF TRANSFER FORMULA- HOT PEEL

• 330 degrees; 
• HEAVY PRESSURE 55PSI (S)
• Pre press for 7 seconds to remove wrinkles and moisture;
• Press for 35 seconds; PEEL IMMEDIATELY
• Press again for 8 seconds, with a parchment paper covering the design for protection (you don' have to cool again before removing the covering on the repress)